Cleaning The Staple - Olivetti DF-670 Service Manual

(3) Cleaning the staple

During periodic maintenance, remove all the staples remaining inside the machine due to failure of stapling.
Procedure
1. Open the front and left covers of the
machine.
2. Open the staple cover and then remove the
staple cartridge.
3. Remove the clip holder.
4. Remove three screws securing the staple
cover and then the cover.
5. Remove the staples attracted to the magnet
on the inside of the staple cover.
6. Refit the staple cover, staple cartridge and
clip holder.
7. Close the left and front covers.
Y108690-3
Staple cover
Staple
cartridge
Screw
Staple cover
Figure 1-5-4
Staple
Service Manual
Figure 1-5-3
Clip holder
Screw
Magnet
Figure 1-5-5
3LB
Screw
1-5-3