Olivetti DF-670 Service Manual page 23

3LB
Maintenance
item No.
Setting the finisher
U246
Description
Provides various settings for the built-in finisher, if furnished.
Purpose
Adjusts the side registration cursor stop position if paper registration is poor or stapling is made outside the
specified area.
Setting
1. Press the start key.
2. Select the desired cursor position.
3. Change the setting using the +/- or numeric keys.
Display
FRONT
REAR
END
4. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Setting the ejection restriction
U342
Description
Sets or cancels the restriction on the number of sheets to be ejected continuously when the internal eject tray
is selected as the eject location.
Purpose
According to user request, sets or cancels restriction on the number of sheets.
Setting
1. Press the start key.
2. Select ON or OFF.
Display
ON
OFF
Initial setting: ON
Details of restriction (number of sheets to be ejected continuously after the start key is pressed)
Condition
When no optional ejection device is installed
When the job separator is installed
When the built-in finisher is installed
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-4
Description
Front side registration cursor stop
position
Rear side registration cursor stop
position
Trailing edge registration cursor stop
position
Description
Sets restriction on the number of sheets
Cancels restriction on the number of sheets
Service Manual
Description
Setting
range
-4 to +4
-4 to +4
-4 to +4
Number of sheets
250
150
100
Initial Change in
setting value per step
0 0.566 mm
0 0.566 mm
0 0.566 mm
Y108690-3