Administrator Password - Draytek Vigor2920n User Manual

ACS Server On
ACS Server
CPE Client
Periodic Inform Settings
STUN Settings
4 . 1 5 . 3 A d m i n i s t r
4 . 1 5 . 3 A d m i n i s t r
This page allows you to set new password.
Old Password
New Password
Confirm Password
When you click OK, the login window will appear. Please use the new password to access
into the web configurator again.
Choose the interface for the router connecting to ACS server.
URL/Username/Password – Such data must be typed
according to the ACS (Auto Configuration Server) you want to
link. Please refer to Auto Configuration Server user's manual
for detailed information.
Such information is useful for Auto Configuration Server.
Enable/Disable – Allow/Deny the CPE Client to connect with
Auto Configuration Server.
Port – Sometimes, port conflict might be occurred. To solve
such problem, you might change port number for CPE.
The default setting is Enable. Please set interval time or
schedule time for the router to send notification to CPE. Or
click Disable to close the mechanism of notification.
The default is Disable. If you click Enable, please type the
relational settings listed below:
Server IP – Type the IP address of the STUN server.
Server Port – Type the port number of the STUN server.
Minimum Keep Alive Period – If STUN is enabled, the CPE
must send binding request to the server for the purpose of
maintaining the binding in the Gateway. Please type a number
as the minimum period. The default setting is "60 seconds".
Maximum Keep Alive Period – If STUN is enabled, the CPE
must send binding request to the server for the purpose of
maintaining the binding in the Gateway. Please type a number
as the maximum period. A value of "-1" indicates that no
maximum period is specified.
a t o r P a s s w o r d
a t o r P a s s w o r d
Type in the old password. The factory default setting for
password is "admin".
Type in new password in this field.
Type in the new password again.
283
Vigor2920 Series User's Guide