Usb Application; Usb General Settings - Draytek Vigor2920n User Manual

Add
4 . 1 4 U S B A p p
4 . 1 4 U S B A p p
USB storage disk connected on Vigor router can be regarded as a server. By way of Vigor
router, clients on LAN can access, write and read data stored in USB storage disk with
different applications. After setting the configuration in USB Application, you can type the IP
address of the Vigor router and username/password created in USB Application>>USB User
Management on the client software. Then, the client can use the FTP site (USB storage disk)
or share the Samba service through Vigor router.
4 . 1 4 . 1 U S B G
4 . 1 4 . 1 U S B G
This page will determine the number of concurrent FTP connection, default charset for FTP
server and enable Samba service. At present, the Vigor router can support USB storage disk
with formats of FAT16 and FAT32 only. Therefore, before connecting the USB storage disk
into the Vigor router, please make sure the memory format for the USB storage disk is FAT16
or FAT32. It is recommended for you to use FAT32 for viewing the filename completely
(FAT16 cannot support long filename).
General Settings
Vigor2920 Series User's Guide
Click this button to add current typed MAC address into Access
Control.
l i c a t i o n
l i c a t i o n
e n e r a l S e t t i n g s
e n e r a l S e t t i n g s
Simultaneous FTP Connections - This field is used to specify
the quantity of the FTP sessions. The router allows up to 6 FTP
sessions connecting to USB storage disk at one time.
Default Charset - At present, Vigor router supports three types
of character sets: default, GB2312 and BIG5.
276