Lan - Created By Using Nat - Draytek Vigor2920n User Manual

12. Then click Edit of Local Address to set a worker's subnet address. Click Edit of
Remote Address to set headquarter's IP address. Leave other fields and click OK.
5 . 4 L A N – C r e
5 . 4 L A N – C r e
An example of default setting and the corresponding deployment are shown below. The
default Vigor router private IP address/Subnet Mask is 192.168.1.1/255.255.255.0. The built-in
DHCP server is enabled so it assigns every local NATed host an IP address of 192.168.1.x
starting from 192.168.1.10.
You can just set the settings wrapped inside the red rectangles to fit the request of NAT usage.
a t e d b y U s i n g
a t e d b y U s i n g
N A T
N A T
317
Vigor2920 Series User's Guide