Foley Engines ZF 45 C Repair Manual page 22

3.11 Assemble the cover down over the input shaft.
NOTE: Be sure of the correct position of the outer disc (63)
when pressing the cover against the housing.
3.12 Install screws (7, 8) with washers (10).
NOTE: Tighten them to 18Nm (13.3 lb ft.) torque.
Tighten the screws evenly to avoid binding the housing on
the shaft.
3.13 Install the output flange (66).
NOTE: Use LOCTITE 245 on the spline between output
shaft and output flange.
20
Repair Manual and Spare Parts List ZF 45C / 63C / 88C
3.14 Wet O-ring (71) with grease.
3.15 Tighten the output shaft ring nut (72). Use tool P.N.
500446 and P.N. 500502.
NOTE: Tighten the ring nut (72) to 120Nm (88 lb ft.) torque.
3.16 Install the breather (22) using LOCTITE 574 and the
oil dipstick (26) together with O- Ring (27).