Complementary Operations - Foley Engines ZF 45 C Repair Manual

Neutral Safety Switch Function check
Connect neutral safety switch with a lamp in series to a
battery. The neutral safety switch operates when the lamp
is lighted.
NOTE: The lamp must be extinguised when the pin is
pushed in.
Battery 14 V DC
Battery 14 V DC

3. COMPLEMENTARY OPERATIONS

3.1 Install the friction bearing (46) with tool P.N. 500494.
3.2 Assemble the output shaft by pressing the shaft into
the housing.
NOTE: Coat output shaft with grease prior to assembly.
As a precaution support the inner race of the bearing.
18
Repair Manual and Spare Parts List ZF 45C / 63C / 88C
Lamp 8.4 A
Neutral
position
Lamp 8.4 A
A or B
position
3.3 Install the thrust washer (45).
CAUTION
Be sure the bend correspond with the hole.
3.4 Assemble the input shaft assembly into the housing.
NOTE: To set correct play see item 3 page 23.
45