Foley Engines ZF 45 C Repair Manual page 13

Repair Manual and Spare Parts List ZF 45C / 63C / 88C
4.15 By striking with a soft hammer remove needle bearing (41).
Only if bearing is defective.
To do it properly support the cover allowing room for the
needle bearing to come out bottom side. Stick a screw
driver/punch into the internal edge of the cage and tap
gently with a soft hammer in a criss cross pattern.
NOTE: This operation will damage the bearing.
WARNING
The improper use of screwdriver / punch can damage
the cover. After having removed the bearing check for
scratches on the cover.
4.16 Remove sealing ring (1) and O-Ring (33) from pump
cover (34).
NOTE: This operation will damage the sealing ring.
Take note of the position of the seal ring.
4.17 Remove baffle (29).
With a screwdriver take out an end of the baffle from
the groove on the housing.
By gripping and rolling up the baffle take it out from the
housing.
NOTE: ZF 45C VERS. TOYOTA 11 ONLY
Two additional baffles (30) and (31) and pin spacer (32) are
present.
4.18 Remove output sealing ring (2).
NOTE: This operation will damage the oil seal.
4.19 Remove circlip (70).
11