Housing Assembly - Foley Engines ZF 45 C Repair Manual

Repair Manual and Spare Parts List ZF 45C / 63C / 88C
1.15 With toll P.N. 500499 and a suitable support press ball
bearing (67).
Add shims (68, 69) max bearing play:
0,1 mm (0.0039 in)
NOTE: To set correct play see item 4 page 25.
1.16 Install snap ring (70).

2. HOUSING ASSEMBLY

2.1 With tool P.N. 500499 install sealing ring (2).
NOTE:
- Use Loctite P.N. 574 between housing and sealing ring.
- Fill internal lips of sealing ring with high quality grease (for
ex. Klüber STABURAGS NBU 30).
2.2 Insert the baffle (29) as shown in the picture. The fold
of the baffle must correspond with the groove on the
housing opposite to the breather position on the second
fold into the same slot. The baffle must be straight and
tight up against the under side of the housing.
NOTE: ZF 45C vers. TOYOTA 11 only
Install additional baffles (30, 31) and pin spacer (32).
2.3 With special tool P.N. 500496 install needle bearing
(41) into the cover (35).
2.4 Install O-Rings (33) into the cover (35).
15