Input Shaft - Foley Engines ZF 45 C Repair Manual

2.16 Don't disassemble the output shaft.
If it's necessary to replace it, ask for complete gear
carrier assembly (38).

3. INPUT SHAFT

3.1 Remove piston rings (39) from the input shaft (37).
3.2 Remove spacer (42b), needle bearing (42a), other
spacer (42b) and shims (75-76).
8
Repair Manual and Spare Parts List ZF 45C / 63C / 88C
3.3 With pliers remove the circlip (44).
NOTE: Take note of the position of the circlip (44).
3.4 Support the ring gear allowing room for the input shaft
with gears to come out bottom side.
NOTE: Pressing on splined end of shaft disassemble it
from the clutch housing.
This operation will damage the bearing.
Use a press with:
distance: 200 mm (8 inches)
min. force: 2000 kg (4400 lbs)
3.5 Remove piston rings (40) from the input shaft (37).