Foley Engines ZF 45 C Repair Manual page 15

Repair Manual and Spare Parts List ZF 45C / 63C / 88C
1.3 Position the circlip (55).
1.4 With tool P.N. 500497 compress the cup springs.
Be sure of their aligment.
1.5 Install the piston rings (40).
NOTE: Coat sealing rings with grease or Petroleum Jally.
1.6 Insert end disc (finished side up) (59), shims (73 - 74)
and alternatively outer clutch disc (61) and inner
clutch disc (60).
NOTE: To set correct play see item 2 page 23.
Clutch discs have to be coated with ATF.
1.7 With tool p.n. 500498 and a suitable support press the
ball bearing (43) into the ring gear support (47).
1.8 Insert the circlip (48).
WARNING
Be sure that snap ring has been properly seated (check
circlip opening to be not close to slots in clutch housing).
13