Move Cursor; Send Pause - Symbol MiniScan MS-220X Integration Manual

MS-120X and MS-220X Integration Guide

Move Cursor

Scan a bar code below to move the cursor in relation to a specified character. Then enter
a character by scanning a bar code from the
13-80.
Note: If there is no match when the rule is interpreted and the rule fails, the
next rule is checked.
Move Cursor To
Character

Send Pause

Scan the bar code below to insert a pause in the transmission of data. The length of this
pause is controlled by the value of the Pause Duration parameter.
13-28
Alphanumeric Keyboard
Move Cursor Past
Character
Send Pause
beginning on page
Move Cursor To Start