Maintenance and Troubleshooting
Overview
The chapter provides information on maintenance and troubleshooting.
Maintenance
Cleaning the exit window is the only maintenance required. Do not allow any abrasive
material to touch the window. Clean the scan window with a damp cloth and, if necessary,
a non-ammonia based detergent.
Troubleshooting
Problem
No red LED or nothing
happens during a scan
attempt.
Chapter 8
Possible Cause
No power to the scanner.
Possible Solutions
Check the system power.
Confirm that the correct host
interface cable is used.
Connect the power supply.
Re-connect loose cables.
8-1