Table of Contents
Advertisement
Trigger Modes
Parameter # 8Ah
•
Level - A trigger pull activates the laser and decode processing. The laser remains
on and decode processing continues until a trigger release, a valid decode, or the
Laser On Time-out is reached.
•
Pulse - A trigger pull activates the laser and decode processing. The laser remains
on and decode processing continues until a valid decode or the Laser On Time-out
is reached.
•
Continuous - The laser is always on and decoding.
•
Blinking - This trigger mode is used for triggerless ScanStand operation. Scanning
range is reduced in this mode. This mode is only supported by MS-120XFZY
models.
•
Host - A host command issues the triggering signal. The scanner interprets an
actual trigger pull as a Level triggering option.
*Level
(00h)
Continuous
(04h)
Host
(08h)
Parameter Menus
Pulse
(02h)
Blinking
(07h)
9-17
Advertisement
Table of Contents
