Speakers - HP Envy Notebook 17 Maintenance And Service Manual

Speakers

Description
Speakers (includes left and right speakers and cable)
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
7. Remove the system board (see
To remove the speakers:
1. Remove the speaker wire from the clips between the speakers (1).
2. Remove the display cable from the channel at the top of the left speaker (2), (3).
3. Remove the two Phillips screws (4)
4. Remove the speakers from the computer (5).
Reverse this procedure to install the speakers.
Battery on page 23).
Optical drive on page
Bottom cover on page
System board on page
24).
28).
43).
Component replacement procedures
Spare part number
809316-001
47