Removal And Replacement Procedures For Customer Self-Repair Parts; Component Replacement Procedures; Battery - HP Envy Notebook 17 Maintenance And Service Manual
Models 17-s000 – 17-s099
Hide thumbs
Also See for Envy Notebook 17:
- Maintenance and service manual (130 pages) ,
- Reference manual (82 pages) ,
- Getting started (76 pages)
Table of Contents
Advertisement
5
Removal and replacement procedures for
Customer Self-Repair parts
CAUTION:
The Customer Self-Repair program is not available in all locations. Installing a part not supported
by the Customer Self-Repair program may void your warranty. Check your warranty to determine if Customer
Self-Repair is supported in your location.
NOTE:
HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then
follow the on-screen instructions.
Component replacement procedures
NOTE:
Please read and follow the procedures described here to access and replace Customer Self-Repair
parts successfully.
NOTE:
Details about your computer, including model, serial number, product key, and length of warranty,
are on the service tag at the bottom of your computer.
This chapter provides removal and replacement procedures for Customer Self-Repair parts.
There are many screws that must be removed, replaced, or loosened when servicing Customer Self- Repair
parts. Make special note of each screw size and location during removal and replacement.
Battery
Description
4-cell, 41-Whr, 2.8-Ah Li K104041–CL battery
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
To remove the battery:
1.
Position the computer upside down on a flat surface.
2.
Slide the battery lock latch (1), and then slide the battery release latch (2) to release the battery.
Spare part number
800049-005
Component replacement procedures
23
Advertisement
Table of Contents
