HP Envy Notebook 17 Maintenance And Service Manual page 60

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
To remove the display assembly:
1. Position the computer on its side, partially open.
2. Remove the four Phillips PM2.5×5.0 screws (1) that secure the display assembly to the computer.
3. Open the display to rotate the hinges upward to an angle (2).
4. Separate the display assembly from the computer (3).
If it is necessary to replace any of the display assembly subcomponents:
1. To remove the display cover:
a. Pry up on each side of the display to disengage the cover and remove the back cover.
52 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 23).
Optical drive on page
Bottom cover on page
24).
28).