b.
Remove the webcam/microphone module from the display (2).
3.
To remove the display panel:
a.
Position the display assembly with the top edge toward you.
b.
Remove the six Phillips PM2.0×1.5 screws (1) that secure the display panel to the bezel.
c.
Lift the top of the panel (2).
4.
To remove the display hinges:
a.
Remove the six Phillips PM2.5×2.0 screws (1) from the bottom of the hinges, and the two Phillips
PM2.0×2.5 screws from the top of the hinges that secure the display hinges to the display.
54
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts