Table of Contents
Advertisement
A dedicated power circuit is recommended for the unit. Additional electrical appliances on the same circuit
may exceed the current (amperage) rating for that circuit. If after the installation of your unit the circuit
breaker trips or the fuse fails on a repeated basis, then a dedicated circuit will likely be required.
If a new socket is required to be installed then this must be performed by a qualified electrician.
To avoid any potential hazard, you must follow the instructions when you install your appliance.
Failure to install the appliance correctly could invalidate any warranty or liability claims and lead to
prosecution.
•
The kitchen area should be dry and aired and equipped
with sufficient ventilation.
•
When installing the oven, easy access to all control
elements should be ensured.
•
This is a built-in oven. Coating or veneer used on
fitted furniture must be applied with a heat-resistant
adhesive (100°C). This prevents surface deformation or
detachment of the coating.
•
Ensure that the cabinet is designed to be used with
built-in ovens.
•
Ensure you have the dimensions given in the diagram for
the oven to be fitted.
•
Once the oven is installed, fix with the four screws in the
places shown in the diagram.
GB-15
Hide quick links:
Advertisement
Table of Contents
