Table of Contents
Advertisement
Replacement of the Oven Lamp
Ensure that the oven is switched off before replacing
the lamp to avoid the possibility of electric shock.
•
Set all controls to the off position " " / "0".
•
Unscrew and wash the lamp cover and then wipe it dry.
•
Unscrew the lamp from the socket, replace the lamp with
a new one that is a high temperature lamp (300°C ) with
the following parameters:
– Voltage 230V
– Power 25W
– Thread E14
•
Screw the lamp in, making sure it is properly inserted.
•
Screw in the lamp cover.
Door Removal
In order to obtain easier access to the oven chamber for
cleaning , it is possible to remove the door, To do this, tilt
the safety catch part of the hinge upwards. Close the door
lightly, lift and pull it out towards you. In order to fit the
door back on to the cooker, do the inverse. When fitting,
ensure that the notch of the hinge is correctly placed on
the protrusion of the hinge holder. After the door is fitted
to the oven, the safety catch should be carefully lowered
down again. If the safety catch is not set it may cause
damage to the hinge or the glass when closing the door.
Removal of the Internal Glass Panel
Unscrew and unfasten the plastic latch that is in the corner at the top of the door. Next take out the glass
from the second blocking mechanism and remove. After cleaning, insert the block and glass panel, then
tightened with screws.
Ensure that you do not damage the glass during this operation.
GB-12
Hide quick links:
Advertisement
Table of Contents
