Control Panel; Power On/Off - Kenmore 251-99701-0001 Use And Care Manual

Dehumidifier with wireless remote monitoring station
Hide thumbs Also See for 251-99701-0001:
Table of Contents

Advertisement

Available languages

Available languages

®®
®
®
®
@@
®®
®
®
POWER ON/OFF (1)
Pressing button once turns the dehumidifier
"ON" and pressing it again turns the
dehumidifier "OFF."
When the unit is turned on, it operates
automatically in COMFORT (3) mode.
AUTO wilt appear in display windows (7/8).
In this setting, humidity level and tempera-
ture are balanced for normal comfort. At
low temperatures higher humidity will feet
more comfortable so the unit will run tess
frequently. At higher temperatures, less
humidity is more comfortable so the unit
may run continuously.
Press SETTINGS (2) once = COMFORT (3)
setting off. Unit will dehumidify continuously.
CONT will appear in display windows (7/8).
Press SETTINGS (2) twice = TIMER (5)
setting is on. TIMER can be adjusted by
pushing the timer arrow-up key (6) _ re-
peatedly to set operating time for 1-12 hours.
Use the arrow-down key _to
reduce the
hours of operation. Hours of operation wilt
be displayed in the TIME/TEMPERATURE
window (7).
Press SETTINGS (2) a third time =
HUMIDITY (4) setting is on. HUMIDITY
allows you to manually set the the desired
humidity level by using the humidity arrow
keys (9) up or down @@. Changes are
made in 5% increments; range of settings is
35% to 70%. HUMIDITY LEVEL is shown in
window (8).
FAN SPEED button (10) FAN SPEED
INDICATOR (11). Press button 1 time for
LOW fan speed, 2 times for HIGH fan speed,
3 times for AUTO. AUTO adjusts fan speed
automatically to the humidity setting.
BUCKET FULL INDICATOR (12). When the
collection bucket isfull, FULL indicator (12)
will come on. The dehumidifier will not run
with the bucket full.
PUMP
ON/OFF (14) Pump On is an optional
setting when using a drain hose to discharge
the collected water. When the pump is on,
display icon (13) will light up. The PUMP
button (14) should be OFF at all times
except when using the pump to discharge
collected water. (See Page 7, Option 3) If
the PUMP button is pressed when using
other water disposal options, E3 (Error
message) will show on display panel.

Advertisement

Table of Contents
loading

Table of Contents