Section 4 Troubleshooting; Fault Codes - Kohler 6EKOD Operation Manual

This section contains generator set troubleshooting,
diagnostic, and repair information.
Use the following charts as a quick troubleshooting
reference. The table groups generator set faults and
suggests likely causes and remedies. The table also
refers you to more detailed information including
sections of this manual, the generator set service
manual (S/M), the generator set installation manual
(I/M), and the engine service manual (Engine S/M) to
correct the indicated problem.
Corrective action and testing often require knowledge of
electrical and electronic circuits. To avoid additional
problems caused by incorrect repairs, have an
authorized service distributor/dealer perform service.
NOTICE
Fuse replacement. Replace fuses with fuses of the same
ampere rating and type (for example: 3AB or 314, ceramic).
Do not substitute clear glass-type fuses for ceramic fuses.
Refer to the wiring diagram when the ampere rating is
unknown or questionable.
TP-6772 2/14b

Section 4 Troubleshooting

Maintain a record of repairs and adjustments performed
on the equipment. If the procedures in this manual do
not explain how to correct the problem, contact an
authorized distributor/dealer. Use the record to help
describe the problem and repairs or adjustments made
to the equipment.

4.1 Fault Codes

The Advanced Digital Control IId displays fault codes to
aid in troubleshooting. Fault codes, descriptions, and
recommended actions are listed in Section 2.7.1.
Identify and correct the cause of the fault condition.
Then reset the controller after a fault shutdown. See
Section 2.7.2.
x:gt:001:002a:
Section 4 Troubleshooting 59