System Overview; Introducing The Devices - Yamaha RIVAGE PM10 Systems Setup Manual

System Overview

Introducing the devices

The RIVAGE PM10 system consists of the following components:
Control surface
CS-R10
The control surface enables you to perform general
operations on the RIVAGE PM10 system.
RY card
RY16-ML-SILK
This is a 16-channel mic/line input card.
It features SILK digital processing technology that has been co-developed by
Rupert Neve Designs and Yamaha.
RY16-DA
This card features 16-channel analog outputs.
RY16-AE
This card features 16-channel digital I/Os that support the AES/EBU format.
A sampling rate converter is built in for both inputs and outputs.
NOTE
• Please refer to the owner's manual supplied with the host device for information on installing the I/O cards.
• For detailed information on I/O card settings, refer to the owner's manual for the I/O card.
For the latest information on which I/O cards can be used with the system, visit the Yamaha Pro Audio website at:
http://www.yamahaproaudio.com/
10 RIVAGE PM10 System Setup Guide
DSP engine
DSP-R10
The DSP engine handles mixing and plug-
in processing, and all other audio
processing for the RIVAGE PM10 system.
HY card
HY256-TL
This digital I/O card supports TWINLANe (Yamaha's
proprietary audio transfer network protocol). It can
handle 256 channels and be installed in the HY card
slot 1.
HY144-D
This digital I/O card supports the Dante digital audio
network. It can handle 128 channels and be installed
in the HY card slot 2.
I/O rack
RPio622
The I/O rack transfers analog and
digital audio signals to and from the
DSP engine.