Power Distribution - Hitachi Compute Blade 500 Series System Overview Manual

Hitachi recommends that the LCD touch console be available for secondary
maintenance application.
The LCD touch console is directly connected to the USB port #0 or 1 on front
panel module. The USB ports are standard USB connectors.
Hot-swappable Modules
All modules are designed to be hot-swappable. The following figure shows the
side of the server chassis from which hot-swap is performed for each module.

Power Distribution

One power cable is required per power supply module. (Four power cables
maximum) In the basic configuration, power cables from a server chassis
connect to a distribution box, and the distribution box is connected to the
power outlet. Hitachi recommends that power outlets use NEMA L6-30R (30
A/250 V) or IEC60309-32 (32A/240V) receptacles.
For more information, see;
– Hitachi Compute Blade 500 Series Site Planning Guide
Figure 1-5 Connecting the LCD touch console
Figure 1-6 Hot-swappable Modules
System Overview
Hitachi Compute Blade 500 Series System Overview Guide
1-7