Switches, Indicators And Connectors - Hitachi Compute Blade 500 Series System Overview Manual

Switches, Indicators and Connectors

Location
1
2
3
4
5
6
7
8
1-10
Figure 1-11 Label Tag
Figure 1-12 Front panel
Table 1-5 Front panel Switches, Indicators and Connectors
Name
USB port 0 (USB0)
USB port 1 (USB1)
Forced power off
switch (POFF)
Power LED (PWR)
Alarm LED (ALM)
Warning LED (WRN)
Identify LED (LID)
Buzzer stop switch
(BZSTP)
System Overview
Hitachi Compute Blade 500 Series System Overview Guide
State
- Server chassis USB ports.
-
- Press and hold for at least four seconds to
force the main power off.
Green-On Main power of one or more server blades
is on.
Green-Blink The server chassis is shut down by the
management module.
Amber-On Main power of all the server blades is off.
Amber-Blink Initialization when the power is first
supplied to the server chassis.
Red -On Alarm, the server chassis found a non
redundant failure.
Amber-On Warning, a failure was detected in one or
more modules.
Blue-On The server chassis is identified.
- Stops the buzzer
Description