Hitachi Compute Blade 500 Series System Overview Manual page 38

Location
7
1 Gb/sec LAN Switch Module (40 ports)
Table 1-18 1 Gb/sec LAN Switch Module Switches (40 ports), Indicators
Location
1
2
3
4
5
6
7
1-30
Name
Identify LED (LOCID)
Figure 1-35 1 Gb/sec LAN Switch Module (40 ports)
Name
LAN ports 1 to 8
Memory Card slot (MC) -
Access LED (ACC)
Reset switch (RST)
Power LED (PWR)
Status1 LED (ST1)
Identify LED (LOCID)
System Overview
Hitachi Compute Blade 500 Series System Overview Guide
State
Red-Blink Fault. Max. temperature limit exceeded
or other warning.
Red-On Alarm.
Blue-On The switch module is identified.
and Connectors
State
Green-On Link established.
Green-Blink Link communication.
Amber-On Link failed.
Slot for an SD memory card.
Green-On The SD memory card is accessed.
- Press and hold for five seconds to reset
the LAN switch module.
Green-On Powered-on, normal operation.
Green-On Normal operation.
Green-Blink Power-on diagnosis or software
activation.
Red-Blink Fault. Max. temperature limit exceeded
or other warning.
Red-On Alarm.
Blue-On The switch module is identified.
Description
Description