Hitachi Compute Blade 500 Series System Overview Manual page 40

1 Gb/sec LAN Pass-through Module
Table 1-20 1 Gb/sec LAN Pass-through Module Indicators and Connectors
Location
1
2
3
10 Gb/sec LAN Pass-through Module
Location
1
2
3
1-32
Figure 1-37 1 Gb/sec LAN Pass-through Module
Name
LAN ports 0 to 15
Identify LED (LOCID) Blue-On
Power LED (PWR)
Figure 1-38 10 Gb/sec LAN Pass-through Module
Table 1-21 10 Gb/sec LAN Pass-through Module Indicators and
Name
LAN ports 0 to 15
Power LED (PWR)
Status 1 LED (ST1)
System Overview
Hitachi Compute Blade 500 Series System Overview Guide
State
Green-On Link established.
Green-Blink Link communication
Amber-On No link.
The LAN pass-through module is
identified.
Green-On Powered-on, normal operation.
Connectors
State
- By default these ports do not have
transceivers installed. The type of
transceiver varies according to
usage.
Green-On Powered on normally.
Green-On Powered on.
Green-Blink In initial diagnostics or in initial
setting.
Red-On An error is detected.
Description
Description