Hitachi Compute Blade 500 Series System Overview Manual page 41

Location
4
5
Brocade 10 Gb/sec DCB Switch Module
Table 1-22 Brocade 10 Gb/sec DCB Switch Module Switches, Indicators
Location
1
2
3
4
5
Name
Unique identification LED
(UID)
Port status LED
Figure 1-39 Brocade 10 Gb/sec DCB Switch Module
Name
Identify LED (LOCID)
Power LED (PWR)
Status LED
Uplink port status LED1 Amber-On
Uplink port status LED2 Green-On
System Overview
Hitachi Compute Blade 500 Series System Overview Guide
State
Red-Blink Warning, such as beyond the
upper-limit temperature, is
detected.
Blue-On The LAN pass-through module is
identified.
Green-On Link established.
Green-Blink Link communication
Amber-On Link is not established.
Green / Amber In initial diagnostics or in initial
blink by turns setting.
and Connectors
State
Blue-On The switch module is identified
Green-On Powered-on, normal operation.
Green-On Normal operation.
Green-Blink Power-on diagnostics or firmware
activation.
Amber-On Fail.
Amber-Blink Warning.
Signal or communication received, but
not on line.
Amber-Blink Slow blink: Port disabled.
Rapid blink: Port failed.
Online.
Description
Description
1-33