Hitachi Compute Blade 500 Series System Overview Manual page 43

Location
7
8
9
10
Brocade 16 Gb/sec Fibre Channel Switch Module
Table 1-24 Brocade 16 Gb/sec Fibre Channel Switch Module Switches,
Location
1
2
3
4
Name
USB port
Management LAN port
Management LAN port
status LED1
Management LAN port
status LED2
Figure 1-41 Brocade 16 Gb/sec Fibre Channel Switch Module
Indicators and Connectors
Name
Identify LED (LOCID)
Power LED (PWR)
Status LED
Uplink port status LED1 Green-On
System Overview
Hitachi Compute Blade 500 Series System Overview Guide
State
Green-Blink Slow blink: The FC port is online but
segmented.
Rapid blink: Diagnostic internal loop
back.
- For an optional USB memory device
dedicated to fibre channel switch
module.
Do not connect any other type of
device.
- Management LAN port for the fibre
channel switch module.
This LAN port is disabled by default.
Amber-On Management LAN port is online.
Green-On 1000 Mbps full duplex.
State
Blue-On The switch module is identified.
Green-On Powered-on, normal operation.
Green-On Normal operation.
Green-Blink Power-on diagnostics or firmware
activation.
Amber-On Fault.
Amber-Blink Alarm.
FC port is online.
Description
Description
1-35