Operation Via An Ac Adaptor (Not Supplied) - Roberts SPLASH MINI Manual

Operation via an AC adaptor (not supplied)

The AC adaptor for use with your Splash Mini radio should provide 5 volts DC
output at 600mA, centre pin positive.
Note: Roberts does not supply a mains adaptor for this radio.
1. Lift back the rubber cover and Insert the adaptor plug into the DC socket
located on the right hand side of your radio.
2. Plug the adaptor into a standard mains socket outlet. Whenever the adaptor
is used the batteries are automatically disconnected.
• IMPORTANT: The mains adaptor is used as the means of connecting the
radio to the mains supply. The mains socket used for the radio must remain
accessible during normal use. In order to disconnect the radio from the
mains completely, the mains adaptor should be removed from the mains
socket outlet completely.
• IMPORTANT: The Splash Mini radio should not be used with the mains
adaptor in a bathroom, shower or poolside environment. Use on
batteries only.
6