Battery Operation; Using The Ac Adaptor - Roberts Sovereign User Manual

Battery operation

1. Release the catch securing the rear door of your radio.
2. Insert four LR20 (D size) batteries into the spaces in the compartment. Take
care to ensure all batteries are inserted with the correct polarity as shown
inside the battery compartment. Close the rear door and secure the catch.
3. The Low Battery indicator lighting, distortion, or the radio switching itself off
are all signs that the batteries may need replacing.
4. If the radio is not to be used for any extended period of time it is recommended
that the batteries are removed from the radio.
We would recommend for economy that the Revival Sovereign is used via
the AC adaptor whenever possible with battery operation for occasional or
stand-by use only.
IMPORTANT: The batteries should not be exposed to excessive heat
such as sunshine, fi re or the like. After use, disposable batteries should
if possible be taken to a suitable recycling centre. On no account
should batteries be disposed of by incineration.

Using the AC adaptor

1. Insert the adaptor plug into the DC in socket on the left hand side of your
radio.
2. Plug the adaptor into a standard 13A mains socket outlet. Whenever the
adaptor is used the batteries are automatically disconnected.
The AC adaptor should be disconnected from the mains supply and the radio
when not in use.
• IMPORTANT: The mains adaptor is used as the means of connecting
the radio to the mains supply. The mains socket used for the radio must
remain accessible during normal use. In order to disconnect the radio from
the mains completely, the mains adaptor should be removed from the
mains socket outlet completely.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
1
Line
Out
DC
7.5V/0.8A
4