Base Station Installation; Ac Power Supplies - Yaesu FTM-3200DR Operating Manual

Base Station Installation

The FTM-3200DR is ideal for base station use as well as in mobile installations. The
FTM-3200DR is specifically designed to integrate into your station easily, using the fol-
lowing information as a reference.

AC Power Supplies

Operation of the FTM-3200DR from an AC line requires a power source capable of pro-
viding at least 20 Amps continuously at 13.8 Volts DC. The FP-1023 (USA market only)
and FP-1030A AC Power Supplies are available from your Yaesu dealer to satisfy these
requirements. Other well-regulated power supplies may be used as well, if they meet the
above voltage and current specifications.
Use the DC power cable supplied with the transceiver to make the power connection to
the power supply. Connect the RED power cable lead to the POSITIVE ( + ) power supply
terminal, and connect the BLACK power cable lead to the NEGATIVE ( – ) power supply
terminal.
Rear panel
FTM-3200DR Operating Manual
Power cable
(DC 13.8 V)
Fuse holder
Black
DC power supply
cable (supplied)
Red
AC power
outlet
Installation
Direct current
power supply
9