Safety Precautions; Decisions You Must Make; Radio Equipment; Power System Recommendations - GREAT PLANES P-40 Warhawk Instruction Manual

PROTECT YOUR MODEL, YOURSELF
& OTHERS....FOLLOW THESE
IMPORTANT SAFETY PRECAUTIONS
1. Your P-40 Warhawk ARF should not be considered a toy,
but rather a sophisticated, working model that functions very
much like a full-size airplane. Because of its performance
capabilities, the P-40 Warhawk ARF, if not assembled and
operated correctly, could possibly cause injury to yourself or
spectators and damage to property.
2. You must assemble the model according to the instructions.
Do not alter or modify the model, as doing so may result in an
unsafe or unfl yable model. In a few cases the instructions may
differ slightly from the photos. In those instances the written
instructions should be considered as correct.
3. You must take time to build straight, true and strong.
4. You must use an R/C radio system that is in fi rst-class
condition, and a correctly sized engine and components
(fuel tank, wheels, etc.) throughout the building process.
5. You must correctly install all R/C and other components
so that the model operates correctly on the ground and in
the air.
6. You must check the operation of the model before every
fl ight to insure that all equipment is operating and that the
model has remained structurally sound. Be sure to check
clevises or other connectors often and replace them if they
show any signs of wear or fatigue.
7. If you are not an experienced pilot or have not fl own
this type of model before, we recommend that you get the
assistance of an experienced pilot in your R/C club for
your fi rst fl ights. If you're not a member of a club, your local
hobby shop has information about clubs in your area whose
membership includes experienced pilots.
8. While this kit has been fl ight tested to exceed normal use,
if the plane will be used for extremely high-stress fl ying, such
as racing, or if an engine larger than one in the recommended
range is used, the modeler is responsible for taking steps to
reinforce the high-stress points and/or substituting hardware
more suitable for the increased stress.
9. WARNING: The cowl included in this kit is made of
fi berglass, the fi bers of which may cause eye, skin and
respiratory tract irritation. Never blow into a part to remove
fi berglass dust, as the dust will blow back into your eyes.
Always wear safety goggles, a particle mask and rubber
gloves when grinding, drilling and sanding fi berglass parts.
Vacuum the parts and the work area thoroughly after working
with fi berglass parts.
We, as the kit manufacturer, provide you with a top quality,
thoroughly tested kit and instructions, but ultimately the
quality and fl yability of your fi nished model depends
on how you build it; therefore, we cannot in any way
guarantee the performance of your completed model,
and no representations are expressed or implied as to the
performance or safety of your completed model.
Remember: Take your time and follow the instructions to
end up with a well-built model that is straight and true.

DECISIONS YOU MUST MAKE

This is a partial list of items required to fi nish the P-40
Warhawk ARF that may require planning or decision making
before starting to build. Order numbers are provided in
parentheses.

Radio Equipment

The P-40 Warhawk ARF requires a minimum 4-channel radio
system with three micro servos with a minimum of 35 oz.-in. [2.5
kg-cm] torque. If you are installing a glow engine, an additional
micro servo is required for the throttle.
❏
Futaba S3115 Micro Precision Servo (FUTM0415)

Power System Recommendations

The recommended engine/motor size for the P-40 Warhawk
ARF is a .25 two-stroke engine or a RimFire
brushless out-runner motor. Engine and motor order numbers
are provided below:
❏
®
O.S. .25 FX Non-Ringed w/Muffl er (OSMG0525)
❏
Great Planes RimFire 35-30-1450kV brushless
out-runner motor (GPMG4600)
If using the recommended brushless motor, the Great
Planes SS-45 brushless ESC is required. Bullet connector
adapters are also required. The adapters can be purchased
pre-assembled, or the individual components can be
purchased to make your own.
❏
Great Planes Silver Series 45A Brushless ESC 5V/2A
BEC (GPMM1840)
❏
Great Planes 4mm Male to 3.5mm Female Bullet
Connector Adapters (GPMM3123)
If you wish to make your own adapters, the following part
numbers will be needed:
❏
Great Planes Gold Plated Bullet Connectors Female
3.5mm (GPMM3113)
3
™
C35-30-1450kV