Interrupting A Copy Job - Develop D1531iD User Manual

5
5.6

Interrupting a Copy Job

By selecting the [Interrupt] key, a multi-copy cycle can be stopped at any
time to make an urgent copy.
Note
Some functions cannot be interrupted. Also, some settings may not
be available when a copy job is interrupted. For more details, refer to
the "Function Combination Table" (p.10-6).
To Interrupt a Copy Job
1
Press the [Interrupt] key.
The Interrupt indicator lights and the
current copy cycle pauses.
? Do you know what settings can
be selected when the [Interrupt]
key is pressed?
➜ When the [Interrupt] key is
pressed, all functions and
settings indicated on the control
panel are reset to their defaults.
2
Remove the original of the
interrupted copy job and then
position the new one that you want
to copy.
5-18
Making Copies
D1531iD/D1831iD