Develop D1531iD User Manual page 50

3
Multiple Bypass Tray
Paper Type
Paper Size
Capacity
Precautions for Loading Paper
G
Be sure to stick to the paper specifications for each tray, i. e., the paper
type, paper size, and capacity, as a paper misfeed could result
otherwise.
G <For metric area>
When loading paper of the inch system (Letter, Legal etc.) in the tray,
change "Paper Auto Detection" of the User's Choice. (p.7-9)
<For inch area>
When loading paper of the metric system (A3, A4 etc.) in the tray,
change "Paper Auto Detection" of the User's Choice. (p.7-9)
G <For metric area>
The Inch lamp lights if paper of the inch system (Letter, Legal etc.) is
loaded in the tray.
<For inch area>
The Metric lamp lights if paper of the metric system (A3, A4 etc.) is
loaded in the tray.
G When loading paper of a nonstandard size in the 1st Tray, set "Custom
Size Input" of the Utility mode. (p.7-14)
G When loading paper of a nonstandard size in the Bypass Tray, perform
the "Custom Size Input (Bypass Tray)" procedure under "Making
Copies." (p.5-9)
G
When loading Cards, OHP transparencies, or postcards in the 1st
Tray, change "Paper Type (1st Tray)" of User's Choice. (p.7-9)
G When loading Cards, OHP transparencies, or postcards in the Bypass
Tray, change "Paper Type (Bypass Tray)" of User's Choice. (p.7-9
G To disable Auto Paper or Auto Tray Switching with recycled paper
loaded in the tray, change "Special Paper Setting" of User's Choice.
(p.7-10)
G
When loading paper of any FLS size other than the default setting (210
mm (8-1/4) × 330 mm (13)), setting by your Tech. Rep. is necessary.
Consult your Tech. Rep. for this setting.
For how to load paper, refer to "When the Add Paper Indicator Lights."
(p.8-4)
3-24
Specifications
• Plain paper, recycled paper (16 lb to 24 lb)
• Special paper:
Card (24-1/4 lb to 41-3/4 lb), OHP transparencies,
postcards, labels
• Width: 3-9/16 to 11-11/16
• Length: 5-1/2 to 17
• Plain paper, recycled paper: 50 sheets
• Special paper: 20 sheets
Before Making Copies
D1531iD/D1831iD
)