Develop D1531iD User Manual page 149

Troubleshooting Tips
Symptom
The image on the copy is not
aligned properly.
D1531iD/D1831iD
Possible Cause
The original is not placed in
the correct position.
The original may not be
suitable for use in the
Automatic Document
Feeder.
The Edge Guide and Trailing
Edge Stop are not pressed
up against the paper stack in
the tray.
The paper has an excessive
curl.
Action
Place the original correctly
on the Original Glass against
the Original Scale. (p.4-7)
Or, load it in the Automatic
Document Feeder correctly
along the Document Guide
Plates. (p.4-3)
Raise the Automatic
Document Feeder and place
the original on the Original
Glass correctly against the
Original Scale. (p.4-7)
Slide the Edge Guide and
Trailing Edge Stop up
against the edges of the
paper stack.
Smooth out curl in the paper
and reload the paper stack in
the tray.
9
9-3