Develop ineo 222 Short Manual

BASIC FUNCTIONS
MAKE A COPY
1. Position the original(s).
2. Type in the number of copies.
3. Press the START key.
STOP A COPY PROCESS
1. Press the STOP key.
CLEAR A VALUE
1. Press the CLEAR key.
ineo 222/282/362
HOW TO USE THE MACHINE
PANEL
TOUCH SCREEN
Accessibility
Open
Enlarge Display
Accessibility
settings
Contrast
Switch to
Enlarge
display
mode
Adjust contrast of Save copy
the touch screen settings
Change presettings of
the machine/
Check the machine's counter
TOUCH SCREEN (Basic screen)
Message display
Open Job list screen
Save scanned data
in a registered User Box
Confirm your
access data Change the mode
RESET the
settings
Reset
Box Extra/Scan Fax/Scan Copy
Access ABC DEF Interrupt
Interrupt a
copy job
GHI JKL MNO Power
Proof Copy
POWER
Mode Memory Stop
PQRS TUV WXYZ
ON/OFF
Utility/ Start
Counter
Mode Check
STOP a
process
Main Power
START a
CLEAR a
Check the Proof a
process
settings value copy set
Input a value or
a number
Number of copies
Change to the functions
of the tab
Choose function of
the BASICS tab
Indication of free
memory
Choose a FINISHING Scan originals of different
function (Sort, group, sizes
staple ...)
LOAD PAPER IN TRAY 1
REFILL
1. Pull out tray 1.
NOTE:
Do not touch the film located
at the right-hand end of the
tray.
2. Load the paper into tray 1
(not higher than ,).
3. Align the trailing-edge guide
with the paper.
CHANGE THE PAPER SELECTION (only for the bypass tray)
1. Open the bypass tray.
2. Load the paper onto the bypass tray (not higher than ,).
3. Touch the desired paper selection.
4. Press the START key.
Short Guide 1/3