Develop D1531iD User Manual page 74

5
X/Y Zoom
This setting allows you to enter the zoom ratio for X and Y independently
from the 10-Key Pad.
1
Position the original.
❍ Original Loading (p. 4-1)
2
Press the [X/Y Zoom] key on the
control panel to light the X/Y Zoom
indicator.
3
Press the [Clear] key to clear the old
value for X (length).
4
First, enter the zoom ratio (%) for X
(length) from the 10-Key Pad and
then press the [Enter] key.
? Do you know the range for the
value X in X/Y Zoom?
➜ The ratio can range from 50% to
100%.
? Do you want to change the value just entered?
➜ Press the [Clear] key and then re-enter the new value.
? What happens when a value outside the specified range is
entered?
➜ The Display shows "Err." Press
the [Clear] key and re-enter a
new value that falls within the
range.
5-14
Making Copies
Y (width)
X
(length)
D1531iD/D1831iD