Develop D1531iD User Manual page 109

Using the Utility Mode
4
Press the [Clear] key.
5
Enter the value of X (length) of the
paper to be loaded from the 10-Key
Pad.
E.g.: Paper length 300 mm
?
Do you want to change the value
just entered?
➜ Press the [Clear] key and then
enter the new value.
? Do you know the range for the paper length of custom size?
➜ The length can range from 140 mm (5-1/2) to 432 mm (17). When
the Length is set 421 mm (16-9/16) to 432 mm (17), the maximum
Width size that can be set becomes 279 mm (11).
6
Press the [Start] key.
7
Press the [Clear] key.
8
Enter the value of Y (width) of the
paper to be loaded from the 10-Key
Pad.
E.g.: Paper width 200 mm
? Do you want to change the value
just entered?
➜ Press the [Clear] key and then
enter the new value.
? Do you know the range for the paper width of custom size?
➜
The width can range from 90 mm (3-9/16) to 297 mm (11-11/16).
When the Width is set 280 mm (11-1/16) to 297 mm (11-11/16), the
maximum Length size that can be set becomes 420 mm (16-1/2).
9
Press the [Enter] key.
D1531iD/D1831iD
7
7-15