Default Settings - Develop D1531iD User Manual

3

Default Settings

When the copier is turned ON, the function indicators on the control panel
will indicate the default settings which serve as the reference for all control
panel settings to be made later.
Default settings
G Number of copies: 1
G Exposure: Auto
G Zoom ratio: 100% (full size)
G
Paper: Auto Paper (When Automatic Document Feeder is mounted)
G Finishing: Non-Sort
Note
<For inch area only>
For size setting, enter the value by mm using the 10-Key Pad. Refer
to conversion rate below.
1 inch = 25.4 mm
Tip
The default settings can be customized by selecting User's Choice.
(p.7-2)
3-16
Before Making Copies
D1531iD/D1831iD