Density (Adf); Printer Density; Paper Auto Detection; Paper Size Detection - Develop D1531iD User Manual

Using the Utility Mode

Density (ADF)

Adjust the copy image density level when the copier is equipped with an
Automatic Document Feeder.
Mode 1: Used for the standard original, such as a word-processor made
document.
Mode 2: Effective in reproducing a pale original, such as a faint pencil-
written document.
G
The default value is "Mode 1."

Printer Density

Select the image density level of copies and printed pages from among "-
2," "-1," "0," "1," or "2."
The smaller the value, the lighter the image, and the greater the value, the
darker the image with "0" as the central value.
G The default value is "0."

Paper Auto Detection

Select "Inch" if the size of the paper loaded in each tray is designated
according to the inch system, such as Letter. Select "Metric" if the size of
the paper loaded in each tray is designated according to the metric
system, such as A4 and B4.
G The default value is "Metric" for metric area.
G
The dafault value is "Inch" for inch area.

Paper Size Detection

Select whether to "automatically detect" or "input size" for the paper
loaded in the 1st Tray.
G The default value is "Automatic detection."

Paper Type (1st Tray)

Select the type of paper loaded in the 1st Tray from among "plain paper,"
"cards," or "OHP transparencies."
G The default value is "plain paper."

Paper Type (Bypass Tray)

Select the type of paper loaded in the Bypass Tray from among "plain
paper," "cards," or "OHP transparencies."
G The default value is "plain paper."
D1531iD/D1831iD
7
7-9