Books - Develop D1531iD User Manual

Loading Originals

Books

When copying an open book or magazine, position the original as
detailed below.
1
Raise the Automatic Document Feeder or Original Cover.
2
Position the book face down on the
Original Glass, with the top of the
book toward the rear of the copier
and the center of the open book
aligned with the book mark (
on the scale.
? Are there any cautions when
you place a book directly on the
original Glass?
➜ Do not place any object that
weighs more than 3 kg (6-1/2 lb)
on the Original Glass. In
addition, do not press down
hard on the book, as a damaged Original Glass could result.
3
Gently lower the Automatic Document Feeder or Original Cover.
? Is a thick book or object being copied?
➜
Let the copier scan the original without lowering the Automatic
Document Feeder or Original Cover. Do not look directly at the
Original Glass surface during a scanning sequence since a strong
beam of light is emitted. This light beam is not, however, a laser
beam and is not as dangerous.
4
Make the Book Separation setting.
❍ Book Separation (p.6-3)
D1531iD/D1831iD
)
4
4-9