FLUSH LOUVER
INSTALLATION
1. The Top Louver is held in place by friction
fit, if the Louver needs to be adjusted; bend
the bracket out as shown in the diagram.
2. Install the Spring Hinges on the left and right
side of the bottom of the Firebox using 2 screws
per hinge.
3. Place the Bottom Louver near the hinge. Flip
hinge over the Bottom Louver and secure using
3 screws.
Hinge
Location
Bottom Louver
FLUSH GLASS
INSTALLATION
1) Install upper and lower trim.
2) Slide the glass into the bottom glass support
and secure with the glass clips using the 2
phillips head screws at the top.
Note: To re-install the glass, reverse the
procedure.
The use of substitute glass will void all product warranties.
Do not operate the appliance if the glass panel(s) are removed, cracked or broken.
Replacement of the glass panel(s) should be done by a qualified service person.
installation
Upper Trim
Lower Trim
WARNING
Regency U31-10 Gas Fireplace Insert
|
21
|
21