Safety Label For The U31-10 - Regency Energy U31-NG10 Owners & Installation Manual

Hide thumbs Also See for Energy U31-NG10:
Table of Contents

Advertisement

|
6
This is a copy of the labels that accompany each U31-10 Gas Insert. We have printed a copy of the contents here for your review. The safety label is
located on a plate inside the base of the unit visible when the bottom louver is opened.
NOTE: FPI units are constantly being improved. Check the label on the unit and if there is a difference, the label on the unit is the correct one.

SAFETY LABEL FOR THE U31-10

For the State of Massachusetts, installation and repair must be done by a plumber or gasfitter licensed in the Commonwealth of
Massachusetts.
For the State of Massachusetts, flexible connectors shall not exceed 36 inches in length.
For the State of Massachusetts, the appliances individual manual shut-off must be a t-handle type valve.
The State of Massachusetts requires the installation of a carbon monoxide alarm in accordance with NFPA 720 and a CO alarm
with battery back up in the same room where the gas appliance is installed.
6
|
Regency U31-10 Gas Fireplace Insert

Advertisement

Table of Contents
loading

This manual is also suitable for:

Energy u31-lp10Energy u31

Table of Contents