Table of Contents
Advertisement
Quick Links
Energy
MODELS: U31-NG10 Natural Gas U31-LP10 Propane
WARNING
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly could result in serious
injury, death, or property damage.
- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other
appliance.
- WHAT TO DO IF YOU SMELL GAS
•
Do not try to light any appliance.
• Do not touch any electrical switch: do not use any phone in your building.
Leave the building immediately.
• Immediately call your gas supplier from a neighbour's phone. Follow the gas supplier's
instructions.
• If you cannot reach your gas supplier, call the fire department.
- Installation and service must be performed by a qualified installer, service agency or the gas supplier.
Tested by:
919-435
FPI FIREPLACE PRODUCTS INTERNATIONAL LTD. 6988 Venture St., Delta, BC Canada, V4G 1H4
U31 Gas Insert
™
Installer: Please complete the details on the back cover
and leave this manual with the homeowner.
Homeowner: Please keep these instructions for future reference.
Owners &
Installation Manual
U31 Video
www.regency-fire.com
02.18.16
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Regency Energy U31-NG10
Summary of Contents for Regency Energy U31-NG10
- Page 1 Owners & U31 Gas Insert Energy ™ Installation Manual U31 Video www.regency-fire.com MODELS: U31-NG10 Natural Gas U31-LP10 Propane WARNING FIRE OR EXPLOSION HAZARD Failure to follow safety warnings exactly could result in serious injury, death, or property damage. - Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
- Page 2 Warnock Hersey/Intertek for both safety and efficiency. As it also bears our own mark, it promises to provide you with economy, comfort and security for many trouble free years to follow. Please take a moment now to acquaint yourself with these instructions and the many features of your FPI Fireplace. U31 Video Regency U31-10 Gas Fireplace Insert...
-
Page 3: Table Of Contents
Normal operating sounds of gas appliances ........26 Copy of the lighting plate instructions ..........27 Maintenance instructions ..............28 Log replacement ................28 Glass gasket .................28 Door glass replacement ..............28 Fan maintenance ................29 Low profile faceplate ..............32 Warranty: limited lifetime ..............35 Regency U31-10 Gas Fireplace Insert... -
Page 4: Dimensions With Standard Faceplate
UNIT DIMENSIONS WITH STANDARD FACE PLATE Regency U31-10 Gas Fireplace Insert... -
Page 5: Dimensions With Low Profile Faceplate
UNIT DIMENSIONS WITH LOW PROFILE FACE PLATE Regency U31-10 Gas Fireplace Insert... -
Page 6: Safety Label For The U31-10
The State of Massachusetts requires the installation of a carbon monoxide alarm in accordance with NFPA 720 and a CO alarm with battery back up in the same room where the gas appliance is installed. Regency U31-10 Gas Fireplace Insert... -
Page 7: Ma Code - Co Detector
(e) A copy of all installation instructions for all Product Approved side wall horizontally vented gas fueled equipm ent, all venting instructions, all parts lists for venting instructions, and/or all venting design instructions shall remain with the appliance or equipment at the completion of the installation. Regency U31-10 Gas Fireplace Insert... -
Page 8: For Your Safety
ALERTED TO THE HAZARDS OF HIGH IF THE BARRIER BECOMES DAMAGED, SURFACE TEMPERATURES, ESPE- THE BARRIER SHALL BE REPLACED CIALLY THE FIREPLACE GLASS, AND WITH THE MANUFACTURER'S BARRIER SHOULD STAY AWAY TO AVOID BURNS FOR THIS APPLIANCE. OR CLOTHING IGNITION. Regency U31-10 Gas Fireplace Insert... -
Page 9: Specifications
BURNING FIREPLACE SAVE THESE INSTRUCTIONS REQUIREMENTS FACTORY BUILT FIREPLACE The Regency Gas Insert must be installed in accordance with these instructions. Carefully NOTE: Any parts that are removed must be removed The U31-10 Gas Inserts have been tested and read all the instructions in this manual first. -
Page 10: Installation Checklist
CHECKLIST 1. The appliance installation must conform with local codes or in the absence of local codes, The Regency Gas Insert is installed as listed below. with CAN/CGA B149 (in Canada) or the National Fuel Gas Code ANSI Z223.1. This 1. -
Page 11: Minimum Fireplace Dimensions
Max. Mantel Depth G 12" / 305 mm Min. Alcove Width K 48" / 1220 mm Max. Alcove Depth L 36" / 915 mm * No Hearth Required Standard Faceplate 8-1/8 ” Low pro le Regency U31-10 Gas Fireplace Insert... -
Page 12: Combustible Mantel Clearances In Masonry Installation
COMBUSTIBLE MANTEL CLEARANCES IN MASONRY INSTALLATION Clearances for Standard Faceplate / Clearances for Low Profile Faceplate with Safety Screen Contour Faceplate with Safety Screen 12 | Regency U31-10 Gas Fireplace Insert... -
Page 13: Conversion From Natural Gas To Propane
Burner grip the wrench by the short side. Orifice 19) Replace Burner Tray and reverse steps 5) to 20) Adjust the burner aeration setting to 3/8" to 3/8" as required for the best flame picture. Regency U31-10 Gas Fireplace Insert... -
Page 14: Gas Connection
Propane 10" w.c. The Regency Insert incorporates its own internal The manifold pressure is controlled by a regulator draft hood, so no additional external draft hood built into the gas control, and should be checked at is required. -
Page 15: Gas Insert Aeration System
The thermally actuated safety switch will auto- matically reset after it has cooled off. The switch will continue to cycle until the draft problem is corrected. DO NOT BYPASS OR DISCONNECT Diagram 3 THIS SWITCH. Regency U31-10 Gas Fireplace Insert... -
Page 16: Log Set Installation
2) Sprinkle the vermiculite around the fi rebox base. Take some of the embers (approx. 1/3 of the bag) and B)02-45 sprinkle over the vermiculite. 16 | Regency U31-10 Gas Fireplace Insert 908-783a Page 1 of 3 03/30/09... - Page 17 E)02-47 and push the bottom right edge against the bracket on the burner tray and the front edge of the rear burner. Notch D)02-46 F)02-48 A)02-43 C)02-56 Bracket B)02-45 Cutout 908-783a 03/30/09 Page 2 of 3 Regency U31-10 Gas Fireplace Insert...
- Page 18 A) 02-43 D) 02-46 G)02-44 F) 02-47 E) 02-45 B) 02-56 C) 02-44 The "02" refer numbers (i.e. 02-43) are molded into the rear of each log. 908-783a Page 3 of 3 03/30/09 18 | Regency U31-10 Gas Fireplace Insert...
-
Page 19: Wiring Diagram
This appliance is equipped with a three pronged (grounding) plug for your protection against shock hazard and should be plugged directly into a properly grounded three-prong receptacle. Do not cut or remove the grounding prong from this plug. Regency U31-10 Gas Fireplace Insert... -
Page 20: Standard Faceplate & Hearth Trim Install
4 remaining black screws. switches with the notch on the left side panel. Diagram 5. 10. Push the Regency logo plate into the two holes in the bottom left corner of the face- plate. 20 |... -
Page 21: Flush Louver Installation
The use of substitute glass will void all product warranties. Do not operate the appliance if the glass panel(s) are removed, cracked or broken. Replacement of the glass panel(s) should be done by a qualified service person. Regency U31-10 Gas Fireplace Insert... -
Page 22: Low Profile Faceplate Installation
Attach the clip to the rear of the faceplate to en- sure that the wires do not touch the side of the unit. The power cord should be run behind the inner faceplate panel. Diagram 7 Diagram 4 02/16/15 919-524 22 | Regency U31-10 Gas Fireplace Insert... - Page 23 Diagram 8 Bracket Inner faceplate panel pins Attach Regency logo to bottom louver. Install bottom louver by hanging louver on brackets installed in step 8. Diagram 11 11) Install safety screen–see next page. Diagram 9 Attach Regency logo to left...
-
Page 24: Safety Screen Installation / Removal
2. Hook the tabs on the safety screen into the slots on the unit. 3. To remove–lift screen assembly up and pull away from unit. 24 | Regency U31-10 Gas Fireplace Insert... -
Page 25: Optional Wall Thermostat
15 min. to stabilize. CAUTION Any alteration to the product that causes soot- ing or carboning that results in damage to the exterior facia is not the responsibility of the manufacturer. Regency U31-10 Gas Fireplace Insert... -
Page 26: Lighting Procedure
Unit Body/Firebox: Different types and thicknesses of steel will expand and contract at different rates resulting in some "cracking" and "ticking" sounds will be heard throughout the cycling process. ON/OFF Button Diagram 2 26 | Regency U31-10 Gas Fireplace Insert... -
Page 27: Copy Of The Lighting Plate Instructions
"OFF". Mettre le bouton de commande de gaz en position OFF pour éteindre la veil- leuse. Pour économiser le carburant, éteignez la veilleuse quand l’appareil reste longtemps inutilisé. 919-525 DO NOT REMOVE THIS INSTRUCTION PLATE Regency U31-10 Gas Fireplace Insert... -
Page 28: Maintenance Instructions
Your Regency insert is supplied with high tem- cleaned. Replace the embers but do not block ment log. The position of these logs must be as perature, 5 mm Neoceram ceramic glass that will the pilot. -
Page 29: Fan Maintenance
Burner Tray to the left, and lift off. Aeration Adjustment Rod 8. Remove the 12 screws holding the Access Panel in place. 9. Remove the Fan Air Duct by removing 4 screws, 2 per side. Regency U31-10 Gas Fireplace Insert... -
Page 30: Parts List
3/4" Rope Gasket Strain Relief Grommet for power cord 404-969 Conversion to LP Kit 404-015 Air Channel 919-435 Manual 402-920 Flush Louvers (Set) - Black *Not available as a replacement part. 405-929 Safety Screen Assembly 30 | Regency U31-10 Gas Fireplace Insert... - Page 31 Remote Transmitter GTMF (Hand Held) 910-572 Remote Receiver 911-137 Remote Receiver Battery Compartment Door 911-164 Valve/Remote Wiring Harness 910-036 Pilot Oridice - NG 910-037 Pilot Orifice - LP 910-341 Thermopile 910-386 Thermocouple *Not available as a replacement part. Regency U31-10 Gas Fireplace Insert...
-
Page 32: Low Profile Faceplate
Description: Standard Faceplate Assembly Part # 405-919 Description: Oversize Faceplate Assembly LOW PROFILE FACEPLATE Part # 403-954 Description: Low Profile Faceplate Back plate Assembly Bottom Louver Right mounting bracket Left mounting bracket Front Frame 32 | Regency U31-10 Gas Fireplace Insert... - Page 33 Regency U31-10 Gas Fireplace Insert...
- Page 34 34 | Regency U31-10 Gas Fireplace Insert...
-
Page 35: Warranty: Limited Lifetime
Conditions: Any part or parts of this unit which in our judgement show evidence of such defects will be repaired or replaced at Regency's option, through an accredited distributor or agent provid- ed that the defective part be returned to the distributor or agent Transportation Prepaid, if requested. - Page 36 Register your Regency warranty online ® www.regency-fire.com Reasons to register your product online today! • View and modify a list of all your registered products. • Request automatic email notification of new product updates. • Stay informed about the current promotions, events, and special offers on related products.
Need help?
Do you have a question about the Energy U31-NG10 and is the answer not in the manual?
Questions and answers