Kit Contents - Hobbico Superstar EP Assembly Instructions Manual

Before starting to build, use the Kit Contents list to take an inventory of this kit to make sure it is
complete and inspect the parts to make sure they are of acceptable quality. If any parts are missing or
are not of acceptable quality, or if you need assistance with assembly, contact Hobbico Product
Support. When reporting defective or missing parts, use the part names exactly as they are written in
the Kit Contents list on this page.
1
2
3
4
5
6
1. Fuselage w/Motor (1)
2. Stabilizer and Elevator (1)
3. Right Wing w/ailerons (1)
4. 9 x 5.5 Propeller (1)
5. Steel Wing Joiner Rod (1)
(1) 2.5mm x 25mm Alignment Pin
(8) Rubberbands
(2) Nylon Landing Gear Straps
(2) Small Nylon Control Horns
(1) Nylon Tail Skid
(2) Brass Screw-lock Pushrod
Connectors

Kit Contents

Hobbico Product Support
Phone: (217) 398-8970
Fax: (217) 398-7721
E-mail: airsupport@hobbico.com
Parts (Photographed)
6. Foam Wheels (2)
7. 1mm x 520mm Pushrods (2)
8. Fin and Rudder (1)
9. Aileron Pushrod Wires (2)
10. Aileron Servo Tray (1)
Parts (Not Photographed)
(2) Nylon Screw-lock Connector
Retainers
(2) 4-40 x 1/4" Pan Head Screws
(4) 3/32" Wheel Collars
(5) 2.5mm x 8mm Sheet Metal Screws
(1) Aluminum Battery Hatch Retainer
(4) 2-56 x 5/8" Machine Screws
5
11. Left Wing w/ailerons (1)
12. Wing Dowels (2) & Caps (4)
13. Hook and Loop Material (4)
14. Main Landing Gear Wires (2)
(4) 4-40 Set Screws
(2) 2-56 Nuts
(2) #2 Washers
(1) Wing Joiner Tape
(1) Electronic Speed Control
(1) Prop Adapter
(1) Steel Anti-Rotate Pin
7
8
9
10
11
12
13
14