Setting Through Sms; Other Sms Notifications - Chuango O2 User Manual

Setting through SMS

If you use a non-smart phone, you can set your system by sending the related SMS
command codes to the SIM card in the control panel.
Item
SMS menu
System setting inquiry
Disarm
Arm
Home arm
Two-way talk
Call back to leave a 10-second voice memo
Store emergency telephone numbers
Store emergency SMS numbers
Store speed dial numbers
Change zone name
Set exit & entry delay time
Set alarm volume and ringing time
Change disarm passcode
Set single zone delay time
13
SMS Command Code
?, ??, ???
00
0
1
2
3
4
5
6
8
901~950
11
12
13
14
For example:
1. Send "5" to the SIM card number of the control panel.
5
2. You will receive a menu SMS from the control panel.
TEL:
1.
2.
3.
4.
5.
3. Copy and edit the menu message, and then send it back.
4. You will receive a SMS for confirmation from the control panel.

Other SMS Notifications

You will receive SMS for reminding you:
1. When the control panel and sensors are in low battery, the 1st stored phone number
will receive a SMS.
2. When the AC power of control panel fails or restores, the 1st stored phone number
will receive a SMS.
3. When the tamper switch of sensors trigger an alarm, all the stored phone numbers
will receive a SMS.
14