Chuango O2 User Manual page 3

In the Box
Arm Disarm Home Arm
Blinks once per second: Searching network.
①
Blinks once per 3 seconds: Connected with network.
Blinking: There is a new voice memo.
②
Enter a phone number and press this call button to make a call.
③
Press and hold it for 3 seconds to leave a 10-second voice memo.
④
Press once to listen to a new voice memo or replay.
1
① GSM Signal Indicator
② Voice Memo Indicator
③ Call
④ Record Voice Memo
SIM Card Slot
Power On/Off
Adapter Jack
System Status
Arm: Press [ ] to arm your system. Now all the sensors are on guarding.
Disarm: Enter the password (default setting: 1234) and press
system. Now your system stops handling alarm signal from sensors (except these
sensors in 24-H zone).
Home Arm: Press [ ] to part arm your system. Now your system only stops handling
alarm signal from home mode zone sensors, which enables users to move freely at
home.
Included Accessories
This alarm system has the following accessories included in the box.
PIR Motion Detector x 1
Door/Window Contact x 1
Remote Control x 2 AC Adapter x 1
[ ] to disarm your
User Manual x 1
2