To Start; To Stop - Wacker Neuson VP 1135R Operator's Manual

Operation
4.4

To Start

See Graphic: wc_gr000086
4.4.1
4.4.2
4.4.3
4.4.4
4.4.5
4.4.6
4.5

To Stop

See Graphic: wc_gr000086
4.5.1
4.5.2
4.5.3
wc_tx000063gb.fm
Open fuel valve by moving lever down (a1).
If engine is cold, move choke lever to closed position (b1). If engine is
hot, set choke to open position (b2).
Open throttle by moving it to the right (c2).
Pull starter rope (d).
Note: If the engine oil level is low, the engine will not run. If engine
does not run, check oil level and add oil as needed.
Open choke (b2) as engine warms.
Open throttle fully (c3) to operate machine.
Reduce engine RPM to idle by moving throttle completely to the left
(c1).
Press stop button (e) until engine comes to a complete stop.
Close fuel valve (a2).
16
VP 1135R/RW