3.16.4 DADF Cover Open Sensor
Perform the following procedure to remove the DADF
1. Remove the DADF right side cover [D].
1 Remove the DADF right side cover [D]
(Refer to 3.16.2)
2. Remove the Linker.
3. Remove 1 screw.
4. Release the DADF Cover Open.
Service Manual
SCX-8030/8040 series
3.Replacemen
nt Procedure
r
Cover Open Sensor from the DADF Unit.
5. Remove 6 screws.
5 Remove 6 screws
Linker
6. If the sensor is defective, replace it.
3-9
90
SAMSUNG ELECTRONICS
Version 0.05